Clarke CSS16V Especificaciones

400mm (16")VARIABLE SPEED SCROLL SAWOperating and MaintenanceInstructionsModel No. CSS16VPart No. 64601121004©400mm (16")VARIABLE SPEED SCRO

SCROLL SAW OPERATING CHARACTERISTICSThe scroll saw’s unique ability is cutting intricate curves which other saws cannot do. A scroll sawcan also be us

IMPORTANT: ALWAYS USE GOOD QUALITY BLADESBLADES BREAK FOR FIVE PRINCIPAL REASONS:1. Too much tension or too little tension on the blade.2. Overworking

12MAINTENANCEA. Apply a thin coat of paste wax on the work table from time to time. This will helpthe wood glide across the table more smoothly.B. The

SPECIFICATIONSMains Voltage: ... 230V, 50Hz, 1 phase.Rating: ...

PARTS LIST14No. Description Part No. No. Description Part No.1 PCB DDCSS16V012 Power Cable complete DDCSS16V024 Hex Nut M6 DDCSS16V045 Pan Head Screw

15PARTS DIAGRAM

2© Copyright Clarke International. All rights reserved. August 1999

Thank you for purchasing this CLARKE 400mm (16") Scroll Saw, designed for DIY or hobby use.Before operating this machine, please read this manual

GENERAL SAFETY RULES FOR OPERATING MACHINERYWARNING:As with all machinery, there are certain hazards involved with their operation and use. Exercisin

✗ NEVER force the machine. It will do a better and safer job at the rate for which it was designed.✗ NEVER operate machine while under the influence o

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through anapproved 13 amp BS 1363 plug, or a suitably fused isolator switch.WA

PRINCIPAL PARTS OF THE SCROLL SAWASSEMBLY71. Should the sawdust blower hose not be fitted,attach as shown in Fig.22. Line up the hole in the blade gua

2.BLADE HOLDER ALIGNMENTIt is important that the blade holders are checked for alignment before use. Misalignedholders will cause the blade to wander,

Fig. 43. BEVEL ALIGNMENT (see fig. 4)To align the bevel indicator, loosen the table bevellock knob, and level the table until it is at rightangles to