Clarke CTS12 Especificaciones descargar pdf (Pagina 19)

ADJUSTING THE RIP FENCE

1. Lift the fence handle up.

2. Slide the rip fence to the position you

require.

3. Push the fence handle down to lock the Rip

Fence into place.

ADJUSTING THE LASER GUIDE

To align the laser guide proceed as follows.

1. Set the blade angle to 0

2. Remove the blade guard. From this point on,

take great care not to damage your hands

on the saw blade teeth.

3. Switch the laser guide on.

4. Carefully grip the end bezel on the laser guide

and turn it until the beam is parallel with the

blade.

5. Loosen the two adjustment screws in the

mounting bracket on the front of the laser

holder (Fig.21).

6. Move the front of the laser holder until the

beam is running along the edge of the

blade.

7. Retighten the two adjustment screws.

8. Replace Blade Guard.

Fig.19

Fig.20

Fig.21

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Sin comentarios

Clarke CTS12 Especificaciones Pagina 19