Clarke CDM20 Instrucciones de operaciones Pagina 7
- Pagina / 24
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
1.2 DURING USE
❉ Never exceed the protection limit values indicated in specifications for each range of measurement.
❉ When the meter is linked to measurement circuit, do not touch unused terminals.
❉ When the value scale to be measured is unknown before hand, set the range selector at the highest
position.
❉ Before rotating the range selector to change functions, disconnect test leads from the circuit under
test.
❉ Never perform resistance measurements on live circuits.
❉ Always be careful when working with voltage above 60V dc or 30V AC rms. Keep fingers behind the
probe barriers while measuring.
❉ Before attempting to insert transistors for testing, always be sure that test leads have been
disconnected from any measurement circuits.
❉ Components should not be connected to the hFE socket when making voltage measurements with
test leads.
CDM-20 Page-6
- DIGITAL MULTIMETER 1
- Guarantee 3
- CONTENTS PAGE 4
- CDM-20 Page-4 5
- 1.2 DURING USE 7
- 1.3 SYMBOLS 8
- 1.4 MAINTENANCE 8
- 2. DESCRIPTION 9
- 2.1 POWER SWITCH 10
- 2.2 DISPLAY 10
- 2.4 INPUT JACKS 10
- 3. OPERATING INSTRUCTIONS 11
- 3.2 MEASURING CURRENT 12
- 3.3 MEASURING RESISTANCE 13
- 3.6 CONTINUITY TEST 14
- 3.4 TESTING DIODE 14
- 3.5 TESTING TRANSISTOR 14
- 4.SPECIFICATIONS 15
- CDM-20 Page-15 16
- 4.3 AC VOLTAGE 18
- 4.4 DC CURRENT 19
- 4.5 AC CURRENT 20
- 4.6 RESISTANCE 21
- 4.8 Fransistor hEE Test 22
- 5. ACCESSORIES 23
Gitzo GK2580TQD manuály
Uživatelské manuály a uživatelské příručky pro Stativy Gitzo GK2580TQD.
Poskytujeme 1 manuály pdf Gitzo GK2580TQD ke stažení zdarma podle typů dokumentů: Manuál
Comentarios a estos manuales