Clarke 00311C Manual del operador descargar pdf (Pagina 15)

ENGLISH

Clarke

Operator’s Manual (EN) - Focus Rider Form No. 71171A - 15 -

How To Prepare the Machine For Operation

How To Install The Brush Or Pad on the BOOST machine

To install the brush or pad on the BOOST machine, follow this pro-

cedure:

1. Turn the key switch “ON”.

2. Put the brush switch in the “UP” position.

3. Turn the key switch “OFF”.

4. Go to the side of the machine.

5. Press on a brush or pad under the ﬂ ex plates. See ﬁ gure 15.

NOTE: When using a black pad, position pad on head.

Lower head and operate momentarily to afﬁ x pad to

pad driver (if you have difﬁ culty, position pad on

ﬂ oor and lower head then operate.)

How To Remove The Brush Or Pad on the BOOST

machine

To remove the brush or pad from the machine, follow this proce-

dure:

1. Turn the key switch “ON”.

2. Put the brush switch in the “UP” position.

3. Turn the key switch “OFF”.

4. Go to the side of the machine.

5. Pull downward on the brush or pad until it releases from the

ﬂ ex plates. See ﬁ gure 16.

Figure 15

Figure 16

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 129 130

Sin comentarios

Clarke 00311C Manual del operador Pagina 15