Clarke Clean Track L18 Especificaciones descargar pdf (Pagina 12)

A-12 / ENGLISH

A-12 - FORM NO. 56041660 - Clean Track

16, 18

AUTHORIZED PERSONNEL MAINTENANCE

SOLUTION PUMP REMOVAL

1 Drain the recovery and solution tanks and tip the machine over onto its side.

2 See Figure 8. Remove the (2) (A) Screws and disconnect both bottom solution hoses (B) from the Solution Pump.

3 Tip the machine back upright, grab hold of the Operator’s Handle (1) and push down to tilt the entire recovery / solution tank assembly back.

BOTTOM VIEW OF MACHINE

4 Disconnect the top solution hose and the pump wiring connectors. The Pump (C) can now be lifted straight up and out of the base assembly.

NOTE: Make note of the orientation of the pump mounts (D) for reassembly. Make note of the connection locations of the wiring for

reassembly.

5 Follow the above steps in reverse order to install the pump.

FIGURE 8

revised 10/07

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 79 80

Sin comentarios

Clarke Clean Track L18 Especificaciones Pagina 12