Clarke Clean Track L18 Especificaciones descargar pdf (Pagina 15)

ENGLISH / A-15

FORM NO. 56041660 - Clean Track

16, 18 - A-15

AUTHORIZED PERSONNEL MAINTENANCE

DEMA INJECTOR MAINTENANCE (WASH & RINSE MODEL)

1 Follow steps 1 through 7 of the SOLENOID VALVE REMOVAL (WASH & RINSE MODEL) section.

2 See Figure 11. Disassemble the DEMA Injector (A) from the Nozzle Assembly.

3 Remove the (4) Screws (B) and disassemble components (C, D, E, F, G, H, I & J). Clean all components and reassemble. NOTE: If there are

lime deposits inside the injector soak all parts in a deliming agent to remove the deposits.

4 Reassemble the Nozzle Assembly and follow steps 1 through 7 of the SOLENOID VALVE REMOVAL (WASH & RINSE MODEL) section in

reverse order to reassemble.

Injector Metered Nozzles (K)

Tip Color Ratio OZ / GAL (nominal)

Tan 102:1 1

Orange 75:1 1.5

Turquoise (installed from factory) 60:1 2

Pink 43:1 3

FIGURE 11

Install correct metering nozzle from chart

closest to the chemical ratio to be used.

See chemical manufacturer’s label for ratio

to be used.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 79 80

Sin comentarios

Clarke Clean Track L18 Especificaciones Pagina 15